CeO2修饰Ni3S2纳米片用于高效电催化析氧

电化学水分解制氢作为重要的生产氢能的新能源技术,包括氢气析出反应(HER)和氧气析出反应(OER).然而,OER进行的是多步电子转移过程,动力学过程缓慢且过电位高,严重制约了电解水制氢的发展.因此开发低成本、高效稳定的非贵金属催化剂替代贵金属催化剂(RuO2,IrO2)来降低过电位,减少能源消耗十分必要.Ni₃S₂由于其高导电性、高活性、低成本等优点,具有作为贵金属催化剂替代品的广阔应用前景,但其OER性能仍需进一步提高.对已有的有效OER催化剂进行表界面调控是提高催化剂性能的一种有效策略.CeO₂中的Ce3+和Ce4+价态之间可以灵活过渡,使其具有良好的电子/离子导电性、可逆的表面氧离子交换和较高的储氧能力.CeO₂的多价性使其有机会与其它基质产生强烈的电子相互作用,良好的电子/离子导电性和较高的储氧能力是提高催化剂析氧活性的有利因素.因此,用CeO₂对Ni₃S₂进行修饰是提高其析氧活性的有效途径.基于此,本文运用水热和电沉积相结合的方法将CeO₂修饰到Ni₃S₂纳米片上,制备得到生长于泡沫镍上的Ni₃S₂-CeO₂纳米片阵列(Ni₃S₂-CeO₂/NF),并运用X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱(XPS)等手段进行了表征,以三电极系统测试了其电催化析氧性能及稳定性,并通过密度泛函理论计算进行了验证.XRD结果表明,复合材料中确实存在Ni₃S₂和CeO₂.通过SEM发现,泡沫镍基底上均匀分布着Ni₃S₂纳米片阵列;电沉积CeO₂后,Ni₃S₂-CeO₂仍保持其纳米片特性,但表面变得粗糙.Ni₃S₂-CeO₂的TEM结果也证实了纳米片结构的形成,高分辨率TEM图像清晰的显示出Ni₃S₂和CeO₂之间具有明显的界面.XPS结果表明,Ni₃S₂-CeO₂的Ni 2p的结合能与Ni₃S₂相比出现负位移.与纯CeO₂的Ce 3d谱图相比,Ni₃S₂-CeO₂杂化体系中Ce4+的比例明显增加,表明Ce的价态发生了重排,部分电子转移给了Ni元素.这些结果均说明Ni₃S₂与CeO₂之间存在着较强的电子相互作用.相应的电催化测试结果显示,在1.0 M KOH中,当电流密度达到20 mA cm^–2时,Ni₃S₂/NF需提供356 mV的过电位,Ni₃S₂-CeO₂/NF只需264 mV的过电位,仅次于RuO2/NF.而且,Ni₃S₂-CeO₂/NF在中性条件下也显示出了较理想的析氧活性.Ni₃S₂-CeO₂/NF的Tafel斜率明显低于CeO₂/NF和Ni₃S₂/NF,表明其具有良好的OER反应动力学.循环伏安法和计时电位法结果均表明,Ni₃S₂-CeO₂/NF具有良好的电化学稳定性.电化学阻抗谱测试结果表明,与Ni₃S₂/NF和CeO₂/NF相比,Ni₃S₂-CeO₂/NF明显具有更小的半圆直径,说明其电荷转移阻抗更小,进一步表明CeO₂的修饰有助于催化过程中电子的快速转移.在非法拉第区域的循环伏安扫描曲线以及拟合扫描速度对电容电流曲线结果显示,Ni₃S₂-CeO₂/NF的最大电容值大于CeO₂/NF和Ni₃S₂/NF,表明其暴露了更多的活性位点,具有更大的电化学活性表面积;而且,Ni₃S₂-CeO₂/NF在400和500 mV时的电催化析氧转换频率明显高于Ni₃S₂/NF和CeO₂/NF,进一步说明Ni₃S₂-CeO₂/NF具有更高的本征催化活性.密度泛函理论计算表明,由于^*OH,^*O和^*OOH与Ni₃S₂-CeO₂中的Ni和Ce原子相互作用的存在,使得反应中间产物与Ni₃S₂-CeO₂之间的结合强度较纯Ni₃S₂或CeO₂强,使其显示出了更高的OER性能.在经过24 h连续电解后,SEM和TEM结果均表明,Ni₃S₂-CeO₂/NF材料仍保持了其纳米片形貌.稳定性测试后的XPS结果表明,Ni 2p对应的峰强度降低,而与氧化镍物种对应的峰强度增强;S元素在Ni₃S₂-CeO₂表面的信号强度明显降低.根据文献报道,在强烈的氧化环境下,过渡金属硫化物会部分转化为氧化物或氢氧化物,这通常被认为是OER过程的实际催化物种.     

碳辅助金属配合物热解法制备高含量Fe-N4单原子催化剂用于氧还原反应

单原子催化剂凭借其超高的原子利用率及在某些反应中表现出的出色催化效果,被认为是最有前途的电催化剂之一,引起了研究人员的极大热情和兴趣.制备高金属含量的单原子催化剂是基础研究和实际应用的前提和关键.然而,由于原子表面自由能随着尺寸的减小而急剧增加,在制备和催化过程中,单原子催化剂的金属原子很容易聚集成团簇甚至颗粒,因此如何制备高负载量的单原子催化剂仍然是一个不小的挑战.在众多单原子催化剂中,非贵金属中铁基单原子被认为是燃料电池中的Pt催化剂的有效替代品.在燃料电池的核心反应–电化学氧还原反应中,Fe-N_x被证明是铁单原子催化剂中的主要活性中心.因此,为了获得更好的氧还原性能,提高铁单原子催化剂中Fe-N_x的含量就显得非常关键.前期已报道了一些关于制备高Fe含量的铁单原子催化剂材料的策略,例如空间限域策略和配位合成策略.其中卟啉和葡萄糖作为配位剂,双氰胺和三聚氰胺可热解成氮掺杂碳材料以捕获金属原子,形成M-N_x.同时,具有高比表面积的富氧碳载体可以通过掺杂氮来作为固定金属原子的位点.我们开发了一种简单直接的方法,通过碳辅助金属配合物热解法制备高金属含量的Fe-N4单原子催化剂,即在最佳碳化温度800℃、三聚氰胺存在下对氮掺杂多孔碳辅助分散铁邻苯二胺配合物进行热解.在该方法中,氮掺杂多孔碳是一种具有丰富氮缺陷,高表面积(1267 m²?g^–1)和良好分散性的多孔生物质碳材料.邻苯二胺作为含两个氨基的二齿配体,可以很容易地与过渡金属配位,形成稳定的平面四配位络合物.此外,由于在高温条件下过渡金属的催化作用,邻苯二胺也被用作氮掺杂碳的前体.因此,氮掺杂多孔碳和邻苯二胺是合成高金属含量铁单原子催化剂的关键前驱体.通过X射线光电子能谱,大角度环形暗场扫描透射电子显微镜和X射线吸收精细结构光谱表征,发现所制备的铁单原子催化剂中铁原子以单个原子的形式锚固在碳载体上,并与碳基质的四个掺杂氮原子配位,得到Fe-N₄的构型.通过调节Fe前驱体量,铁单原子催化剂中Fe的最高负载量达到7.5 wt%,在目前已经报道的铁单原子催化剂中排第四.电化学氧还原测试表明,在0.10 M KOH溶液中,随着铁含量的增加,铁单原子催化剂的氧还原性能逐渐提高.其中250Fe-SA/NPC-800样品表现出最高起始电位0.97 V和最正的半波电位0.85 V,可与市售的40%Pt/C催化剂相媲美.和已报道的铁单原子催化剂相比,由于我们制得的催化剂的比表面积较低,只有247 m²?g^–1,所以制约了催化剂的性能.在混合动力学势域中,根据Koutecky-Levich方程计算得出的电子转移数约为3.6,表明250Fe-SA/NPC-800主要催化四电子转移过程,这可以归因于以Fe-N₄活性中心降低了四电子过程中关键中间体的形成能垒及过程的自由能变化.此外,250Fe-SA/NPC-800展现了较高的电化学稳定性.连续工作6 h后,250Fe-SA/NPC-800保留了超过87%的电流密度,而Pt/C表现出明显的衰减,仅保留了49%.     

过渡金属电催化剂在硅基光阳极分解水产氧中的作用

光电化学分解水可将太阳能转换为绿色的氢能,为目前的能源危机和环境问题提供了一种理想的解决方案.在分解水反应中,涉及四空穴过程的产氧半反应是制约性能的关键步骤,往往需要在半导体表面沉积电催化剂以加速产氧反应动力学.因此,全面理解电催化剂在光电化学分解水体系中的作用至关重要.在目前的产氧电催化剂中,过渡金属羟基氧化物电催化剂(MOOH,M=Fe,Co,Ni)因其环保、廉价、高效以及稳定的特性,已被广泛用于半导体光阳极分解水器件中.而且,MOOH可用简单的电沉积方法沉积在光电极表面,易于大面积制备.然而,电沉积法制备的MOOH具有复杂的结构,对其作用机制的全面理解更加困难.因此,本文以电沉积MOOH修饰的硅基光阳极(n⁺p-Si/SiO_x/Fe/FeOx/MOOH)作为模型,研究了不同电催化剂对硅光阳极光电化学产氧性能的影响.实验发现电催化剂的界面优化在电催化剂修饰的光电极中发挥着重要作用,这是因为优化的界面可以提升界面电荷传输,提供更多的催化反应活性位点以及更高的本征催化活性,从而更有利于光解水性能的提升.该项研究揭示了电催化剂在光解水器件中的作用,并为今后高效光解水器件的设计提供了一定指导.首先在多晶n⁺p-Si基底上热蒸镀了一层30 nm的金属Fe膜,并通过电化学活化将Fe膜表面转换为FeOx得到Fe/FeOx(记作aFe)界面层,然后利用电沉积方法制备MOOH表面修饰层,最终得到n⁺p-Si/SiO_x/aFe:MOOH光阳极.X射线光电子能谱、拉曼光谱以及扫描电子显微镜表面元素成像的表征结果均证实电极表面由于界面层金属Fe元素的掺杂而形成了Fe1-xNixOOH.在模拟太阳光下用于光解水产氧时,n⁺p-Si/SiO_x/aFe:NiOOH电极的起始电位为~1.01 VRHE(相对于可逆氢电极的电势),在1.23 VRHE下的光电流为38.82 mA cm^-2,显著优于n⁺p-Si/SiO_x/aFe、n⁺p-Si/SiO_x/aFe:FeOOH以及n⁺p-Si/SiO_x/aFe:CoOOH三个对比样品,且其稳定性达到75 h.另外,我们发现n⁺p-Si/SiO_x/aFe:MOOH电极的光电化学产氧性能均显著高于n⁺p-Si/SiO_x/aFe电极,且p++-Si/SiO_x/aFe:MOOH的电催化产氧性能也高于p++-Si/SiO_x/MOOH,不仅证明了aFe界面层对Si与MOOH层之间的界面接触作用的有效调控,而且表明双电催化剂体系(aFe:MOOH)的电催化产氧活性高于单电催化剂(MOOH).热力学分析表明,n⁺p-Si/SiO_x/aFe:MOOH光阳极的光电压大小与其光解水产氧性能并不一致,从而排除了热力学因素对性能的关键影响.进一步从塔菲尔斜率、电化学活性表面积和电化学阻抗谱对各电极的动力学进行了分析,证明了动力学因素在上述光阳极产氧性能中的主导作用.同时发现,由于aFe:NiOOH双电催化剂具有更高的本征电催化产氧性能,提供了更多的表面活性位点以及更有效地促进了光生载流子的传输,对动力学的提升效果更显著,从而使n⁺p-Si/SiO_x/aFe:NiOOH光阳极表现出最高的光解水产氧性能.     

Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Oxygen-vacancy-enhanced Catalytic Activity of Au@Co3O4/CeO2 Yolk-shell Nanocomposite to Electrochemically Detect Hydrogen Peroxide

Biomimetic electrochemical sensors are very promising not only due to their lower expense and longer stability than conventional enzymatic ones, but they also often suffer from simultaneously achieving high sensitivity and good selectivity. Here we present a well-defined Au@Co₃O₄/CeO₂ yolk-shell nanostructure (YSN) that is first synthesized and exploited as highly efficient electrocatalysts for hydrogen peroxide (H₂O₂) detection. The introduced CeO₂ in Co₃O₄ matrix greatly facilitates the migration of lattice oxygen, which increases the concentration of surface oxygen vacancies (O_a), remarkably enhancing the adsorption ability of H₂O₂ and promoting the decomposition of H₂O₂ for faster electron transfer than pristine Au@Co₃O₄ core-shell nanostructure (CSN). The abundant O_a of Au@Co₃O₄/CeO₂ YSN is confirmed by X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). The as-prepared biomimetic sensor delivers a wide dynamic range (5.0 nM to 5.4 μM), a low limit of detection (LOD) (2.74 nM), and a high sensitivity (35.67 μA μM⁻¹ cm⁻²), paving a new way to construct an ultrasensitive and selective enzyme-free biomimetic electrochemical sensor. Furthermore, the sensor is used to real-time monitor H₂O₂ released from human cervical cancer cells (HeLa) and human umbilical vein endothelial cells (HUVEC), demonstrating its great potential in practical applications.     

Mo掺杂调控电子结构增强NiS电催化固氮性能

以泡沫镍为骨架,通过水热法制备了Mo掺杂的NiS多级纳米花状结构(Mo-NiS)。在偏压为-0.7 V(vs RHE)下,2 h内,0.83 Mo-NiS(制备时钼、镍物质的量之比为0.83)的电催化固氮速率平均可达4.21μg·cm~(-2)·h~(-1),法拉第效率平均为18%。XPS测试和DFT计算表明,Mo掺杂增加了Ni活性位点周围的电子云密度,提高了电荷传输速率,促使*NNH_2到*N能垒大幅度降低,从而提升了电催化固氮效率。     

碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g?C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差。我们采用简单的一步热共聚法,以尿素和2,4,6?三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS?x,x mg代表掺入TAPD的质量)。X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(XPS)等测试结果表明,来自TAPD的嘧啶环成功引入g?C3N4共轭体系中,使所得的CNNS?x具有较窄的带隙,较快的光生载流子迁移速率,从而提高其对可见光的吸收效率和光生载流子的分离效率。得益于此,CNNS?x在可见光照射下表现出较好的光解水产氢活性。特别是CNNS?30具有最佳光解水性能,其产氢速率可达57.6μmol·h-1,是g?C3N4纳米片(CNNS)的4倍。     

Cu Doping-Induced Transformation from [Ag62S12(SBut)32]2+ to [Ag62−xCuxS12(SBut)32]4+ Nanocluster

The change in the valence state of nanocluster can induce remarkable changes in the properties and structure. However, achieving the valence state changes in nanoclusters is still a challenge. In this work, we use Cu²⁺ as dopant to “oxidize” [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ (4 free electrons) to obtain the new nanocluster: [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ with 2 free electrons. As revealed by its structure, the [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ (x=10∼21) has a similar structure to that of [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ precursor and all the Cu atoms occupy the surface site of nanocluster. It′s worth noting that with the Cu atoms doping, the [Ag_62−xCu_xS₁₂(SBu^t)₃₂]⁴⁺ nanocluster is more stable than [Ag₆₂S₁₂(SBu^t)₃₂]²⁺ at higher temperature and in electrochemical cycle. This result has laid a foundation for the subsequent application and exploration. Overall, this work reveals crystals structure of a new Ag−Cu nanocluster and offers a new insight into the electron reduction/oxidation of nanocluster.     

The preparation of ionic liquid based iron phosphate/CNTs composite via microwave radiation for hydrogen evolution reaction and oxygen evolution reaction

Water electrolysis is a promising method for hydrogen production, so the preparation of low-cost and efficient electrocatalysts with a quick and simple procedure is crucial. Herein, iron phosphate (Fe₇(PO₄)₆) was prepared via microwave radiation using ionic liquid (IL) as iron and phosphorus dual-source. This method is simple and rapid, and the product can be directly used as electrocatalysts without further treatment. The experimental results show that the IL can influence the morphology and electrocatalytic performance. Moreover, the addition of carbon nanotubes (CNTs) is favorable for formation of iron phosphate nanoparticles to improve the catalytic activities. As hydrogen evolution reaction (HER) catalyst, this iron phosphate/CNTs exhibits an onset overpotential of 120 mV, Tafel slope of 32.9 mV dec^-1, and current densities of 10 mA cm⁻² at overpotential of 185 mV. Then, it obtains a good activity for oxygen evolution reaction (OER) with a low onset potential of 1.48 V, Tafel slope of 73.3 mV dec^-1, and it only needs an overpotential of 300 mV to drive the 10 mA cm⁻². This bifunctional catalyst also shows good durability for HER and OER. This microwave-assisted method provides an outstanding strategy to prepare iron phosphate in a simple and fast process with good catalytic performance for water splitting.